Logo R+M / Suttner
  easywash365+ logo Homepage . News . Imprint . www.easywash365plus.com  
 
 
  easywash365+ anwendung News

easywash365+ wash brushes



Large areas are completely clean from now on!

By means of a very wide work surface of approx. 260 x 80 mm the easywash365+ wash brush is especially designed for the efficient cleaning of large areas such as railway carriages, tramcars, omnibuses, caravans, trucks, boats and ships, facades, greenhouses as well as vehicles, motorcycles and many more.

Fine and extremely soft natural bristles with split ends ensure an especially gentle cleaning of sensitive surfaces such as windows and car finish. The solid body of the easywash365+ wash brush consists of 152 bristle bundles which are attached undetachably by means of multi-component synthetic resin.

Our easywash365+ wash brush convinces all users working in the self-service foam- and prewash of an ideal and very easy handling.

The soft coating of the body made out of thermoplastic elastomer demonstrably protects sensitive surfaces from damages.

The inlet of the easywash365+ wash brush is equipped with a brass insert with 1/4" female thread which is fixed in the body. By means of an additional grub screw the high pressure lances available at self-service bays are safe from twisting and theft. Therefore, the grub screw needs to be screwed to the lance tube. Further fastening plates or protection against theft are not required.

13 outlet ports at the bottom of the easywash365+ wash brush enable the required water flow and guarantee a convincingly good foam quality at the same time.

Our enclosed data sheet gives you further information about the easywash365+ wash brushes. You can download it as a pdf-file (english . deutsch).

Our recommendation to you: Wash your car also in the wintertime!

Do you wash your car in the wintertime? Many car owners think that this is pointless as their cars get dirty again anyway. But, however experts advise to regularly wash one`s car in a thorough way in case of a substantial use of road salt. The reason for this is that both paint and even the mechanics suffer considerably if road salt, dirt and water are left on the car for a longer time. The worst case would be that the seals were impaired by the salt and the mechanics were finally affected from inside.

What`s the remedy? To wash the car - the more often, the better! The water does not only remove the salt but also dangerous nests with dirt from the edges. Before going into the car wash plant the coarse dirt should be removed by means of a high pressure cleaner. The rocker panels as well as the wheel housings should also be prewashed. Furthermore, it is very important to dry and to subsequently lubricate the door seals after the washing. By means of glycerin or a special car care product the door seals are kept elastic and smooth.

Sealing of the paint prevents damages! In order to realize a best possible protection effect a cleaning of the paint with polish and subsequent sealing is recommended. A smooth and protected paint surface is substantially less susceptible to salt, leaches and dirt. Moreover, an underbody washing is also recommended in order to avoid that rusting is caused by salt and greasy salt mixture.

Please note that not every car wash plant is opened during the wintertime! But, however we are convinced that you find your supplier of confidence who welcomes you all year long.

easyclean365+ microfiber cloths - the perfect duo



The streak-free cleaning wonder! The WA 600 is ideal for the professionally interior cleaning of vehicles, car finish, motorcycles, catering trade, kitchen & bathroom.

The extremely absorbent drying wonder! The WA 1400 is ideal for the professionally exterior cleaning of vehicles, car finish, motorcycles, catering trade, kitchen & bathroom.

»  Excellent water absorption and high absorption speed by polyurethane skin which treats the surfaces with care.
»  Composition: PET/PA microfibre, high-tech polyurethane.
»  Water drops on the surfaces after cleaning are a thing of the past and the use of any detergents is dropped.
»  Due to the interwoven and strong texture the microfibre cloth is tear-resistant. Furthermore, it is lint-free, antibacterial, very kind to your skin and anti-allergic.
»  Both cloths are washable and usable several times.

According to the principle "completely clean with only one wipe". Even spots like fingerprints are removed in the twinkling of an eye and the surfaces gleam in mint condition.

Our enclosed data sheet gives you further information about the easyclean365+ microfiber cloths WA 600 and WA 1400. You can download it as a pdf-file.

easywash365+ vertical boom

Absolutely new in the car wash industry!

»  rotatable by 360°
»  completely made out of stainless steel
»  solid construction
»  spring action

The vertical easywash365+ boom for single washing bays! This cost-efficient solution is ideal for smaller self-service motorcycle, bicycle or car washing bays. It is not absolutely imperative that the boom is incorporated in the technical board as it can be easily mounted on the wall. Therefore, the vertical boom is also the perfect solution for areas with a shortage of space. Due to its compact design not much room is needed, but however a high degree of mobility is given. The radius of 360° as well as the built-in spring guarantee best possible mobility when carrying out the washing.

The vertical easywash365+ boom is completely made out of stainless steel. A mounting bracket is included in the consignment.

Our enclosed data sheet gives you further information about the vertical easywash365+ boom. You can download it as a pdf-file.

High quality Car Wash vacuum hose



The new Car Wash vacuum hose available in blue or blue - turquoise is another high quality product designed for the professional car wash. This hose is produced by means of a patented extrusion process. This process makes it possible to achieve a virtually smooth interior and to provide it with a highly abrasion-proof as well as dirt-resistant plastic coil. The smooth structure of the interior is ideal for minor flow resistance and associated drops in pressure. Contrary to usual vacuum hoses the highly abrasion-proof and welded coil does not imbibe any dirt particle which might harm the vehicle`s paint and the interior.



One further advantage of the hose`s construction is its very light weight and the high bending property (flexibility). Furthermore, the coil offers and guarantees excellent elastic recovery in case of radial deformation, e.g. when being run over. The coil also operates in a stabilized way against shrinking of the hose in case of high depression, elevated ambient temperature or strong solar radiation.

The hose`s material is UV-resistant, weatherproof and flexible at low temperatures. Its nominal diameter is 38 mm. Rotating hose and connection sleeves as well as vacuum tools for this hose are also available in our range of products.

These great characteristics stress and show that our new Car Wash vacuum hose is a sensational novelty. Please do not wait any longer in order to have a good look at it - place your order this very day!

R+M catalogue 2010-11 - all language versions available from today!

For sure, you know how important it is to prioritize! The production of our catalogue is executed according to this principle. In this case the German and English versions have absolute priority. After this we directly produce the catalogues in French, Russian and Spanish.

We are happy to inform you today that we finished this task successfully as all language versions can now be downloaded. The printed version in all languages is available with effect from 2 August 2010.

Successfully re-audited - now according to DIN EN ISO 9001 : 2008

We are surprised by the fact how time flies! Three years ago we have implemented ISO 9001 : 2000 which is now ISO 9001 : 2008. The safety standards authority informed us about the fact that the essential re-auditing is planned for June 2010. During this audit it has been checked in detail if we completely identify ourselves with the existing quality management system and continuously improve it. Trust is good, control is better. You can rely on us as we have got everything under control. These words have been ours when informing you about the successful auditing.

This success is continued now as the auditor was entirely satisfied with the results. We earned a great deal of praise regarding the guidance of personnel, the involvement of new staff members and the inward motivation of everybody to do further training. And everything in order to be exactly what you have in mind since customer satisfaction is our fundamental goal. Your requirements are our strengths!

The well-earned certificate is still on its way to us! If required, we are willingly prepared to provide you with it in the course of the following weeks.

Bent easywash365+ handle for easywash365+ lances




In our previous newsletters we have told you a few times that human-factor engineering plays a very important role in self-service washing bays. In this context we should mention and talk about our easily operated easywash365+ spray guns (pdf) with enormously reduced trigger and holding forces or the high pressure hose CARWASH COMFORT (pdf) - the new hose wonder in self-service washing bays.

By introducing the newly bent handles one further contribution to ergonomic self-service car wash is made by us. The bending angle of 20° is ideal for the use in self-service washing bays as it enormously improves the handling of the wet and very heavy wash brush. The ergonomic design suits it to be perfect for the strong man`s hand as well as for the tender woman’s hand.

A transition piece made out of plastic covers the connection between handle and brush lance and protects from burns. Starting at the 1/4" M inlet up to the 1/4" F outlet the handle is made out of stainless steel 1.4305 / AISI 304. The non-slip plastic insulation with different surface structures is made out of polypropylene.

Our data sheet gives you more information about the pre-assembled easywash365+ brush and spray lances with the new easywash365+ handle. You can download it as a pdf-file.

This time you are definitely convinced of the ergonomic aspect! We are looking forward to hearing from you and to receiving your enquiries.

Additional instruction for use of all double ceiling booms offered in our range



We are anxious to rule out the possibility of all application errors when using our products so that we would like to give you the following to remember: By attaching the high pressure line to the lower pipe of the double ceiling boom this demonstrably prevents the upper swivel from wearing out after only a short time.

Bearing our words in mind shall save you a lot of trouble and unnecessary costs! Thank you very much for having paid your attention to us at this point.

Air powered sprayer and foamer with pressure tank



The new air powered sprayer and foamer with pressure tank are either made out of stainless steel V2A / AISI 304 or steel coated. Both versions are equipped with an integrated and very rugged transport trolley with 2 reels and a filler made out of the material of the chosen model. The filling is very easy and effected by means of a plastic hopper to fill in. They need to be connected to the compressed-air supply and are designed for max. 8 bar. Furthermore, both devices feature a default safety valve, a chemically resistant hose, a lance in a length of 60 cm and a fill level indication.

Which applications do our novelties suit? The stainless steel version is suitable for the use in the food industry, car wash and industry. The coated steel version is designed for car wash and industrial cleaning.

Please note that a permanent pressure exposure is required to achieve an uniform foam result.

Our data sheet gives you more information about the sprayer and foamer. You can download it as a pdf-file.

CARWASH COMFORT - the new hose wonder in self-service washing bays


High pressure hoses at self-service car wash sites are in combination with the spraying unit or the brush lance the decisive factor regarding the ease of use during the operation. As there are more and more female and also older people cleaning their car in self-service washing bays both human-factor engineering and the smallest possible weight are very important.

Due to an easy handling with enormously reduced trigger and holding forces as well as integrated swivels our well-proven and favoured spray guns and handles from our product line easywash365+ have been convincing our customers for many years. One thing for sure! By means of the developed CARWASH COMFORT hose especially designed for self-service car wash and prewashing you will love to clean your car as it is really one of the easiest jobs.


What it actually stands for and which characteristics it has? With only 92 g/m this hose is more than half in weight in comparison to a usual self-service hose. The smooth chemically resistant interior is made out of PES which is usually used for highly stressed parts such as medical gadgets or in the automotive engineering and aircraft industry.

The transparent surface made out of a thermoplastic elastomer in blue or anthracite has excellent gliding characteristics in combination with wetness. In comparison to many hoses that tend to get stuck at mirrors, bumpers or at other edges at the vehicle the CARWASH COMFORT does not share this lot as it is very easy to pull it around any corner. The smooth surface always looks clean and dirty stripes on vehicles or clothes are a thing of the past.

It goes without saying that the hose is oil-, UV-, ozone-resistant and weatherproof as well as flexible in case of low temperatures. As its temperature range goes from -40 °C - +60 °C the CARWASH COMFORT is the ideal year-round hose. Due to the excellent flexibility the user easily makes his way by pulling the hose which is attached to the ceiling boom around his car in a very comfortable way. The high-tensile polyester reinforcing guarantees a working pressure of up to 200 bar, with a fourfold guarantee as usual that the hose does not burst.

Our data sheet gives you more information about the CARWASH COMFORT. You can download it as a pdf-file.

You know everything about the new hose wonder now! But, however you can confirm that it also satisfies your demand only after having tested it. Do not lose any time and resolve to order it this very day!

easywash365+ high pressure guns

easywash365+ Drehgelenke

The high pressure gun easywash365+ was specially developed for the use in the car wash industry. Due to the patented LTF technology (Low Trigger Force) the easywash365+ is ideal for professional permanent cleaning applications and the connecting units are made out of corrosion resistant materials. The high pressure lance is completely made out of stainless steel. The extra long and shockproof insulation serves as protection of the vehicles and is variable in its length and replaceable.

Advantages of the easywash365+ guns

90 % reduced holding force and 40 % reduced trigger force against usual market guns.

The integrated freeze protection makes a trouble free employment possible on 365 days of the year, an exchange between summer and winter is not required.

The stainless steel inlet swivel reduces the rotation of the hp hose. Safety for the user is guaranteed.

The easywash365+ high pressure gun is available in the following versions: Standard high pressure gun . Weep high pressure gun . Freeze stop high pressure gun

easywash365+ lances with moulded handle Cool & Compact

easywash365+ Drehgelenke

Inlet: 1/4" M . Outlet: 1/4" M
Material: stainless steel . Max. 400 bar / 150 °C

The easywash365+ lances are available in the following versions:

R+M Nr. 200 129 306
Length: 600 mm
Insulation: 300 mm

R+M Nr. 200 129 709
Length: 900 mm
Insulation: 700 mm

R+M Nr. 200 129 712
Length: 1200 mm
Insulation: 700 mm

ST-1100 high pressure guns

easywash365+ Drehgelenke

As an alternative to the high-end easywash365+ product which is developed on the basis of the ST-2600 with LTF technology the price conscious car wash supplier is provided with the small cousin ST-1100.

Due to the durable metal components of the interior and the robust vented handles made out of plastic the ST-1100 is the ideal spray gun for self-service car wash. The ergonomic shape with reduced dimension has so far been available only in a standard version. With effect from today we also offer you a frost-proof version with weep function. Both versions optically differ as the safety catch at the new model is blue instead of black. They are both equipped with 3/8" female thread and also with an integrated swivel.

Moreover, these spray guns are designed for a pressure range of max. 210 bar, a flow rate of max. 25 l/min and a temperature range of max. 150 °C.

easywash365+ handles and lances

easywash365+ Drehgelenke

The new easywash365+ handles are ergonomically designed. They are angled 20 °. The handles are available in black and blue.

easywash365+ handles
Inlet: 1/4" F. Outlet: 1/4" M. Max. 310 bar / 150 °C

The easywash365+ lances are available in the following versions:

R+M Nr. 515 65
Lance with easywash365+ handle and nozzle protector ST-10 without nozzle.
Length 500 mm. Max. 310 bar / 45 l/min / 150 °C

R+M Nr. 200 009 670
Lance with moulded handle Cool & Compact, easywash365+ handle, air injector and wash brush (bristles 60 mm)
Length 900 mm. Insulation 700 mm. Max. 50 °C

R+M Nr. 200 009 675
Lance with moulded handle Cool & Compact, easywash365+ handle, air injector and wash brush (bristles 60 mm)
Length 1200 mm. Insulation 700 mm. Max. 50 °C

easywash365+ lance holder - a convincing choice of quality!

easywash365+ Drehgelenke

We have already introduced the easywash365+ lance holder with optional wall mounting bracket to you. The fact that we can now offer you three different versions is very pleasant.

The easywash365+ lance holder are available in the following versions:
easywash365+ lance holder with optional wall mounting bracket (105 620)
easywash365+ lance holder for wall mounting (105 630)
easywash365+ lance holder for floor mounting (105 640)

Have you already made up your mind which version suits you most?

easywash365+ lances with vented handle ST-9.1

easywash365+ Drehgelenke

Inlet: 1/4" M . Outlet: 1/4" M
Material: stainless steel . Max. 400 bar / 150 °C

The easywash365+ lances are available in the following versions:

R+M Nr. 200 009 350
Length: 600 mm
Insulation: 335 mm

R+M Nr. 200 009 351
Length: 800 mm
Insulation: 410 mm

R+M Nr. 200 009 352
Length: 1000 mm
Insulation: 410 mm

R+M Nr. 200 009 355
Length: 1000 mm
Insulation: 810 mm

R+M Nr. 200 009 356
Length: 1200 mm
Insulation: 1010 mm

easywash365+ elbow swivels

easywash365+ Drehgelenke

The easywash365+ elbow swivels totally made out of stainless steel replace both R+M versions, the stainless steel as well as the chromed brass ones. They are available either in 1/4" F / M or 3/8" F / M.

Two high performance double acting o-ring energized seals designed for rotation guarantee an extremely long durability at constantly free movement - even under extreme conditions. We would like to stress that the easywash365+ elbow swivels are designed for a pressure of up to 400 bar and for temperatures of up to 90 °C. Due to its compact construction and the fact that it is maintenance-free the elbow swivel is not only the ideal swivel for ceiling booms but also for e.g. hose reels and high pressure cleaner. Furthermore, the easywash365+ elbow swivels are suitable for hot and cold water applications as well as for the mediums air, oils and greases.

Max. 400 bar / 90 °C

The easywash365+ elbow swivels are available in the following versions:
easywash365+ elbow swivels - 1/4" M - 1/4" F - 200 320 550
easywash365+ elbow swivels - 3/8" M - 3/8" F - 200 320 500

Low pressure pre-spraying unit

easywash365+ Motorrad Deckenkreisel

Pre-spraying unit with spray gun ST-810, lance ST-28 Cool & Compact zinc-plated steel, nozzle protector ST-10 and nozzle 65° 01 with filter.

R+M Nr. 200 810 765
Inlet: 1/4" M swivel
Outlet: 1/8" F

Matching hose flexy
R+M Nr. 390 052 208
DN 06
Black
Length: 8 m
Connection: DKR 1/4" + PKS

easywash365+ swivels

easywash365+ Drehgelenke

The easywash365+ swivels are applicable to high pressure spray guns and hose connections, ceiling booms as well as self-service car wash. Inox! The reinforced inner part is made out of stainless steel and the housing is made out of a mixture of stainless steel and brass nickel-plated.

Max. 275 bar / 150 °C

The easywash365+ swivels are available in the following versions:
easywash365+ swivels - 1/4" M - 1/4" F - 562 391 600
easywash365+ swivels - 1/4" M - 3/8" F - 562 391 605
easywash365+ swivels - 3/8" M - 1/4" F - 562 391 610
easywash365+ swivels - 3/8" M - 3/8" F - 562 391 615
easywash365+ swivels - 1/4" F - 1/4" F - 562 391 620
easywash365+ swivels - 3/8" F - 3/8" F - 562 391 625
easywash365+ swivels - 1/4" F - M18 M - 562 391 630

easywash365+ mat cleaner

easywash365+ MattenklopferThe knocked off dirt falls trough the lattice into the drawer ease disposal. The galvanized steel construction gives long service life. Delivered with fixing screws.

R+M Nr. 105 700
Height x width x depth: 1000 x 500 x 400 mm
Material: galvanized steel
Weight: 22 kg

easywash365+ ceiling booms

easywash365+ Standard Deckenkreisel
easywash365+ Doppeldeckenkreisel
easywash365+ Deckenkreisel-Z
easywash365+ Motorrad Deckenkreisel

The R+M standard and double ceiling booms being available in our range so far have been replaced by the easywash365+ car wash ceiling booms. The cornerstone was the newly developed easywash365+ ceiling boom-Z model which enlarges our product group as additional version.

We would like to stress that it is sometimes necessary to embark on a new strategy if there is a significant change regarding product requirements. You are the winner as you should be entirely satisfied with the results. All demands for the new versions have been fulfilled or even surpassed.

We have following ceiling booms in our range:
easywash365+ standard ceiling boom
easywash365+ ceiling boom-Z
easywash365+ double ceiling boom
easywash365+ motorcycle ceiling boom

Mosmatic ceiling booms

Mosmatic Standard Deckenkreisel

Mosmatic Deckenkreisel-Z

Mosmatic Deckenkreisel-Z

The Mosmatic ceiling booms are available in the following versions: standard, ceiling boom-Z and double ceiling boom.

We have following ceiling booms in our range:
Mosmatic standard ceiling boom
Mosmatic ceiling boom-Z with insulated high pressure hose
Mosmatic double ceiling boom with insulated high pressure hoses
 
 
 
easywash365+ . products, components and accessories for the professional car wash
Logo R+M / Suttner
  Language: deutsch . english . polski . français . руccкий Imprint